Actis H'Control Hybrid - Multi-Foil Insulation with Vapour Control
Actis's new H-Control Hybrid insulation product is a reflective vapour control layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings
Installed on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings, to enhance thermal values, and vapour and moisture control.
H'Control Hybrid insulation provides dual performance within a single product : a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U Value.
It can be used in conjunction with any type of insulation.
H'Control Hybrid insulation is available in rolls of 1.6m x 6.25m = 10m², and 45mm thick.
Actis H-Control Hybrid provides dual performance within a single product : a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U Value. It can be used in conjunction with any type of insulation
H'Control Hybrid is available in rolls of 10m2 (1600mm wide), 45mm thick
It is classified A+ for internal air quality according to ISO 16000
It is clean - does not generate dust or fibre
Does not require earthing
Installation is easy as H'Control Hybrid can be stapled or nailed
The flexible properties of H'Control Hybrid enable fitting to any uneven surface, allowing a continual insulation, thus offering a high quality installation without air leakages
Product Information and Certification
Links to manufacturer's information. Click to download in a separate browser window.
Actis H'Control Datasheet | Actis H'Control Certification | Actis Hybrid Products Overview
H'Control Hybrid has been tested in a laboratory according to the following EN standards ...
EN 13984 : Flexible sheets for waterproofing. Plastic and rubber vapour control layers
EN 16012 : Thermal insulation for buildings. Reflective insulation product. Determination of the declared thermal performance
It has been tested on site by the Glasgow Caledonian University according to: ISO 9869 : Thermal insulation - Building elements - In-situ measurement of thermal resistance, and thermal transmittance Part 1 : Heat flow-meter method
H'Control Hybrid also complies with BS5250 – Code of Practice for Control of Condensation in Buildings and helps to meet the requirements of Approved Document L 2010 (England & Wales) and Section 6 (Scotland)
With a value of > 1000 MNs/g, Sd > 200 m, H'Control Hybrid blocks water vapour diffusion through the fabric of the building, thus preventing any risk of condensation.
It is is airtight, so it acts as a barrier against air leakage and thermal convection
Resulting from its sandwich assembly, its 45 mm thickness and its two low emissivity external faces of = 0.06
H'Control Hybrid achieves a declared core R-value of 1,90 m2.K/W (with no air gaps – in direct contact) and an R value of 3,20 m2.K/W with 2 air voids of 20 mm (horizontal flow), as certified by VTT.
Priced on Application:
Generally, Actis products are readily available
Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.
Contact us directly for further information: Telephone 0333 9000 989 - Email: Click Here: